Hello, Up for bid is a Hydraulic Roller Cam for an originally equip 19??- Oldsmobile. This is a stock billet regrind cam great for street/strip with power through to 6000, and will work well for a 455 or larger cubic inch set-up. Use with carb or mass air induction. If you are not familiar with the regrind process, you could think of it as coping a key. You have the master template which provides the lobe profile for the slave product. In the picture below is a before, and after shot of a stock core cam compared to the new regrind Cam. The regrind is done by a company that has been serving many speed shops in my area for years, and will have no runs. The Cam is a small circle based Cam for added stroke clearance to avoid rod bolt grinding, if needed, and can be used with the stock distributor gear for roller. The Cam will provide a very lopey idle with good mid and high-end performance. Poor idle quality for mass air. The specs. and applications are as followed:

Grind Number # HR-288-Olds

Valve Setting:

IN./Hyd.

EX./Hyd.

RPM Operating Range:

2500 to 6000

Duration:

Advertised IN./288 EX./294

@.050" IN./236 EX./242

Valve Lift:

W/1.6 Rocker: IN./.555 EX./.574

*W/1.7 Rocker: IN./.590 EX./.612

Lobe Sep. Angle: 112

Applications: 9:1 CR, Intake, Headers,
3000 Stall or Manual, 3:73 Gears or lower.

Olds Grind List!!

The cam will be shipped sealed, and with a cam card. I accept PayPal, Money Orders, and Cashers Check. (Sorry No COD's or Personal Checks). All international bidder email before bidding, and if win pay all customs tax associated with the item when received. The item will be shipped when payment clears, and their is a 7 day return policy upon delivery. Please e-mail me within 72 hours of sale to confirm payment, and shipping details. Thank You for looking. Good Luck, and Happy Bidding!!