Hello, Up for bid is a Hydraulic Roller Cam for an originally equip 4.3 1992-99 Vortec or Non-Vortec Roller Block. This regrind is very good for street/strip, and entry level bracket racing The regrind is done by a company that has been serving many speed shops in my area for years, and will have a no runs. If your are not familiar with the regrind process it is like copying a key. You have the master template which provides the lobe profile for the slave product. This process is done by cutting on the back end of the lobe. Their is no welding to be done.. It does not have the fuel pump lobe for use with a mechanical fuel pump, and must be used with an electric fuel pump. Can be used with a stock type distributor gear for Hydraulic Roller or a hardened aftermarket gear. The Cam will provide a noticeable idle with good mid and high-end performance. The specs. and applications are as followed:

Grind Number # HR-288-4.3ND

Valve Setting:

IN./Hyd.

EX./Hyd.

RPM Operating Range:

2500 to 6000

Duration:

Advertised IN./288 EX./294

@.050" IN./236 EX./242

Valve Lift:

W/1.5 Rocker: IN./.520 EX./.540

*W/1.6 Rocker: IN./.554 EX./.576

Lobe Sep. Angle: 112

Applications: 9:1 CR, Intake, Headers,
3000 Stall, 3:73 Gears or lower.

The cam will be shipped sealed, and with a cam card. I accept PayPal, Money Orders, and Cashers Check. (Sorry No COD's or Personal Checks).
The item will be shipped when payment clears, and their is a 7 day return policy upon delivery. Please e-mail me within 72 hours of sale to confirm payment method, and shipping details. Thank You for looking. Good Luck, and Happy Bidding!! (If you have any questions please ask before bidding.)

* Whenever you change to a higher rocker arm ratio be sure to check valve to piston clearance as always.
** If using a high performance fuel pump it is advised to use a bronze tip fuel pump pushrod.

If you have any question please e-mail me before bidding a utilitycomponents@yahoo.com Thanks!!

***!!I have Cams for the following applications!!***;