Hello, Up for bid is a Hydraulic Flat Tappet Cam for an originally equip pre-1996 Big Block Chevy. This is a regrind cam good for street machines, and enrty level strip. If you are not familiar with the regrind process, you could think of it as coping a key. You have your master template which provides the lobe profile for the slave product. The regrind is done by a company that has been serving many speed shops in my area for years, and will have no runs. The Cam has very quick throttle response, and will provide a sligthly rough idle with good torque performance. The specs. and applications are the equivalent to a Comp XE 264:

Grind Number# HYD-264-CSB

Valve Setting:

IN./Hyd.

EX./Hyd.

RPM Operating Range:

1600 to 5800

Duration:

Advertised IN./268 EX./280

@.050" IN./224 EX./230

Valve Lift:

W/1.7 Rocker: IN./.540 EX./.544

Lobe Sep. Angle:

IN./112'

Applications: 8.5:1 CR, Intake, Headers,
Sock Stall, Better With 1800 Stall+, 3:42 Gears or lower.

The cam will be shipped sealed, and with a cam card. I accept PayPal, Money Orders, and Cashers Check. (Sorry No COD's or Personal Checks). All international bidder email before bidding, and if win pay all customs tax associated with the item when received. The item will be shipped when payment clears, and their is a 7 day return policy upon delivery. Please e-mail me within 72 hours of sale to confirm payment, and shipping details. Thank You for looking. Good Luck, and Happy Bidding!!

If you have any question please e-mail me before bidding at utilitycomponents@yahoo.com Thanks!!

*Whenever you change to a higher rocker arm ratio be sure to check valve to piston clearance as always.

!!My disclaimer: This cam is a regrind, and is not to be assumed as a part of any corporation or as such!!

***!! I have Cams for the following applications!!***;